- Total $0.00
Springs fit the RZR Turbo Primary Clutch 2016-2020 or our HD conversion clutch kit for the Pro XP/2021 RZR Turbo Springs DO NOT fit the P90X primary found on Pro XP models or 2021 RZR...
Bung Mount Fit Kit – Can-Am Maverick X3 Coupled with a Pair of Bung Mounts, this Fit Kit for the Can-Am Maverick X3 allows the mounting of our Sector Seven mirrors in the Factory location.
Quiet core(cap) fits our slip-on exhausts Fits into one of your outlets which makes sound waves bounce inside that tube and reflect back, making it quieter than a single outlet exhaust. Because of our exhaust...
Fits RZR Turbo, Turbo S, RS1, RZR XP 1000 & Other models Fits models with a 1.5" steering post, we suggest measuring before ordering just to be sure Does not fit models with the gauge...
Fits 2017-Up Can Am X3 Turbocharged models **Does not fit 2022 X3 RR 200hp model as they have a different P-Drive primary clutch** Makes removing your primary clutch arms easy! The Quick Compression Blocks...
Dirt Dudes Genuine Content Logo Hoodie *2XL + $2 *3XL + $4 *4XL + $6 *5XL + $8
Yeah Dude Vibes Only Hoodie - Black *2XL + $2 *3XL + $4 *4XL + $6 *5XL + $8 *6XL + $10
Eat Sleep Shred Repeat Hoodie *2XL + $2 *3XL + $4 *4XL + $6 *5XL + $8
Yeah Dude Vibes Only Hoodie - Tan *2XL + $2 *3XL + $4 *4XL + $6
Dirt Dudes UTV Genuine Content Trapper Hat - Grey / Black **Limited Quantities**
Fits all AA exhausts with 2.5" outlets including RZR Turbo, XP 1000, Pro XP, General, 1000 S, Can Am X3, KRX Slides into the exhaust and comes with the correct bolt Use 1 of these...
Spider Castle Nut Removal tool Fits on 1/2" impact or breaker bar Fits many Polaris vehicles including: 2014+ RZR XP 1000, 2016-2020 RZR Turbo, General, RZR XP 900, RZR 900 S, Ranger 900, RZR RS1...
A MUST HAVE ITEM! These high quality rollers replace the square factory sliders found in all of the 2016-Up RZR clutches (Not RS1 or RZR Turbo). These actual rollers will improve shifting and will show...
Rollers fit the Team Tied secondary clutch found on 2014-15 XP 1000 models Rollers fit the Team Tied secondary clutch found on the 2011-14 RZR XP 900 Rollers also fit secondary clutches found in our...
Tool fits 2016-2020 RZR Turbo, 2018-2020 RZR Turbo S, All Years RZR RS1, **2014-15 ONLY RZR XP 1000** This tool is needed whenever you remove the bolts/mounts holding the motor and transmission together. On...
Keep all of your accessory controls in reach with the MTS Steering Wheel Switch Panel Mount. No more reaching across the cockpit in aggressive driving conditions just to switch your lights. 3D printed out of...
Keep all of your accessory controls in reach with the MTS Steering Wheel Switch Panel Mount. No more reaching across the cockpit in aggressive driving conditions just to switch your lights. 3D printed out of...
FITMENT: Segway Villain SX10 and SX10W Segway Villain's "Exposed Engineering" design is a head-turner. Unfortunately with that design comes additional air flow into the cab from under the hood line. To help alleviate some of...
Puller fits all Polaris models using the P90X which is currently the 2020+ RZR Pro XP, 2021 Turbo & Turbo S, & New Body Style 18+ Ranger's, 2019+ Ranger Crew Models & Ranger Single Cam...
Fits 2016+ RZR Turbo, Turbo S & Pro XP Models Replaces OEM part number 2413095 This replaces the sensor in your intake plenum and/or charge tube (same sensor for both) Excellent high quality sensor replacement...
Fits 2016-2020 RZR Turbo Models, 2014+ RZR XP 1000, All General 1000, All RZR 900 S/Trail/XC, All RZR 1000 S/Trail, All Ranger 900, Ranger, Ranger 1000 Old Body Style, and many others *** DOES NOT...
Fits 2016-2020 RZR Turbo, Turbo S & RZR RS1 Primary Clutches High quality replacement needle bearing with washers Replaces OEM parts 3514890 & 7556893 ($70 in parts) Replaces your worn out/sticking primary clutch bearing causing...
Fits 2016-2020 RZR Turbo, Turbo S & RZR RS1 Primary Clutches High quality replacement needle bearing with washers Replaces OEM parts 3514890 & 7556893 ($70 in parts) Replaces your worn out/sticking primary clutch bearing causing...
Fits all 6 arm X3 clutches ***DOES NOT FIT 2022 200HP RR MODELS WITH THE P-DRIVE** This heavy duty primary clutch puller makes removing the primary clutch easy. This is not necessary to install clutch...
Have you ever tried reversing in your Polaris RZR Pro R, Turbo R, & ’24 Polaris RZR XP (Not Pro-XP) to find out how much visibility you’re losing in the Ride Command screen? The Sector Seven Billet...
Fits 2020-Up RZR Pro XP Models Covers the ugly heat shielding found when removing the OEM rear plastic exhaust cover Laser cut with the AA logo Easily bolts into place with the factory bolts...
Slider savers fit 2016-2020 RZR Turbo, RZR Turbo S & RS1 Models The OEM slider savers normally last quite a while, but sometimes these are worn out and grooved. When this happens, it's a good...
Sliders fit 2016-2020 RZR Turbo, RZR Turbo S & RS1 Models These custom molded AA primary sliders have a thicker bridge to add strength to the slider. This keeps them from breaking which is a...
Helix buttons fit 2017-2020 RZR Turbo & Turbo S Models Our custom molded AA helix buttons are a much stronger design due to our improved molding process. The factory part has voids which cause the...
Secondary Clutch Sliders fit 2016-2020 RZR Turbo & Turbo S Models Our custom molded AA helix sliders are a much stronger design due to our improved molding process Anti-friction ridges are put on the sliding...
Fit 2017+ Can Am X3 Models 154HP, 172HP, 120HP, 195HP, 200HP Designed for units with oversized tires, heavy workload and high horsepower. Made from the latest Heat Resistant Compounds Can withstand continuous heat up to...
Fits 2017-Current Can Am X3 Models 120hp, 154hp, 172hp, 2020 195hp DOES NOT FIT 2021-22 X3 RR 195hp Models Fits 2018+ RZR XP 1000 models (These models have a larger o2 sensor bung than previous...
Dirt Dudes UTV Lightweight Windbreaker - Black / Camo 2.5 oz., 100% polyester Wind- and water-resistant Matte finish eyelets and zippers #4 zipper with zipper pull *2XL + $2 *3XL + $4
Available in Red/Black, Grey/Black, or Gold/Black 5.4 oz., 80/20 cotton/polyester Two chest pockets with button-down flaps Roll-up sleeves with button placket Adjustable cuffs Half back yoke Black neck tape *2XL + $2 *3XL + $4
Weatherproof Women's Quilted Vest - Rosin 3.0 oz. polyester fill,100% nylon with diamond quilt pattern Contrast lining Covered nylon zipper with metal logo pull Slight high low hem with side vents
Available in Red/Black, Grey/Black, or Gold/Black 5.4 oz., 80/20 cotton/polyester Two chest pockets with button-down flaps Roll-up sleeves with button placket Adjustable cuffs Half back yoke Black neck tape *2XL + $2 *3XL + $4
Available in Red/Black, Grey/Black, or Gold/Black 5.4 oz., 80/20 cotton/polyester Two chest pockets with button-down flaps Roll-up sleeves with button placket Adjustable cuffs Half back yoke Black neck tape *2XL + $2 *3XL + $4
This R2C air filter fits all Can Am X3 models 2017 - Up Filter fits only in the OEM airbox Designed for the most grueling off road conditions with 99.992 efficiency - unmatched on...
We get this question all the time, "How can I clean my windshield on the trail?" How about a portable pressure washer? Introducing the PORTABLE battery powered pressure washer. While out on the trail, simply...
Fits all X3 models 2017-2022 including the 120hp, 154hp, 172hp, 195hp & 200hp base models Install the plate, then screw the tool into your clutch. Rotate the handle and your secondary will split open, making...
Fits 2016-2022 RZR Turbo models including Turbo S & Pro XP Direct replacement for OEM controller which can clog and become faulty causing over or under boost conditions Great to have a spare! Part number:...
Primary buttons fit 2020+ Pro XP & 2021 RZR Turbo & Turbo S Models Our custom molded AA buttons are a much stronger design due to our improved molding process. The OEM buttons are...
Fits 2015-2021 models using the small 12mm o2 sensor from Polaris Replaces OEM part number 4016021 Fits RZR XP 1000 2015-2017 Fits RZR Turbo & Turbo S all 2016-2018, and many 2019-2020 models (Check size...
Dirt Dudes UTV Sherpa Lined Zip Hoodie - Black 14 oz./yd² total weight 8.5 oz./yd², 80/20 cotton/polyester blend fleece exterior with 100% cotton face, 32 singles 5.5 oz./yd², 100% polyester sherpa lined interior (the two fabrics, fleece...
Dri Duck Trek Vest - Black 10.0 oz., 100% cotton Canyon Cloth canvas Sherpa lined collar and back yoke Quilted nylon lined body with 3 oz. of polyfill insulation Double chest pocket design with snap closures...
Combine and get more entries. For The Ladies Bundle includes a Ladies Quilted Vest in Rosin color & a Ladies Pom Beanie (Diamond Pattern / Black) OR Ladies Fleece Headband (Leopard / Black). Every $10 spent is 1...
The Dirt Dudes Flannel Bundle includes a Long Sleeve Flannel in Red/Black, Gold/Black, or Grey/Black & your choice of Beanie (Heather Grey, Dark Grey, Navy Flag, or Pom Heather Grey / White). *2XL + $2 *3XL + $4
Are you looking for the most badass tunes available for your Dynojet Powervision? Here you are! These tunes are for customers that already have the Powervision for the RZR XP Turbo. If you are looking to...
Are you looking for the most badass tunes available for your Powervision? Here you are! These tunes are for customers that already have the Powervision for the Ranger 900. If you are looking to tune two vehicles...
Are you looking for the most badass tunes available for your Powervision? Here you are! These tunes are for customers that already have the Powervision for the General 1000. We are highly experienced in tuning...
Fits all Turbo S 72" Wide, All RS1, & 2019+ 64" Wide RZR Turbo (2nd gen style clutch cover) Drastically decreases belt & clutch temps. The vent sits directly above the fins on the back...
This primary clutch fan blade is a must have for anyone with the turbo/RS1 clutches! The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring...
Are you looking for the most badass tunes available for your Dynojet Powervision? Here you are! These tunes are for customers that already have the Powervision for the RZR XP Turbo. If you are looking to...
Are you looking for the most badass tunes available for your Powervision? Here you are! These tunes are for customers that already have the Powervision for the RZR XP Turbo. If you are looking to tune...
Tunes are for 2016+ RZR 1000 S & Trail S (1000cc) models Are you looking for the most badass tunes available for your Powervision ? Here you are! These tunes are for customers that already...
Are you looking for the most badass tunes available for your Powervision? Here you are! These tunes are for customers that already have the Powervision for the RZR XP 1000. If you are looking to tune...